Skip to content

Keyboard shortcuts

Press ? (or Shift+/) to open the Keyboard Shortcuts help. Press ? or Esc to close it. The help does not open while the cursor is in a text field, a text area or a select.

The help has four tabs: Board, Session, Terminal and Hub. This page lists their groups in the same order.

Plain letter keys work only when you press no modifier. For example, I opens session info, and Ctrl+I does nothing in Claude Code Kanban. Letter keys do nothing while you type in a field.

Keys Action
↓ Next item
↑ Previous item
← Left column, or collapse a group in the sidebar
→ Right column, or expand a group in the sidebar
Tab Move focus between the sidebar and the board
Enter or Space Open the selected item

When the embedded terminal replaces the board, Tab moves focus between the sidebar and the terminal. If the board has no task cards, Tab from the sidebar does nothing.

Keys Action
Enter or Space Open or close the task detail panel for the selected card
D Delete the selected task, after you confirm
E Expand the task detail panel to the center of the window, or restore it to the right side
N Open or close the scratchpad. In the sidebar, open the scratchpad of the item under the cursor.
Ctrl+E In a session scratchpad, set the session’s emoji
Esc Close the next open item, in this order

Esc on the board closes one item each time you press it:

  1. The task detail panel.
  2. The agent log in the session log panel.
  3. The session log panel.
  4. If nothing is open, it clears the task selection.

In the sidebar, Esc removes the keyboard cursor.

Keys Action
[ or ] Go to the previous or next tab of the session view: Board, then the session’s panes. A split counts as one tab. It does nothing while the terminal is on.
| Split the tab on screen with the tab before it, or end the split. See Split view.
{ or } Move focus to the left or right side of a split
Alt+[ or Alt+] Change the tab in the side of a split that has focus
Alt+W Close the pane that has focus. It does nothing on Board.
Shift+F10 Open the menu of the tab that has focus. The Menu key also works. In the sidebar, the item under the cursor gets its menu instead.
Keys Action
\ Show or hide the sidebar
H Close the open session and show the home view
T Switch between light and dark theme
Shift+S Open the storage manager
Ctrl+Shift+Z Turn zen mode on or off: the current session, or the group or project under the sidebar cursor. It works when the terminal has focus. In a text field it stays redo. Shift+Z also works outside the terminal.
Ctrl+Shift+K Show or hide Kanbot, the board assistant. Show puts focus in Kanbot’s terminal, and hide gives focus back to where it was. It works from the board terminal and from inside Kanbot. It does nothing when the terminal is off.
Ctrl++ Larger text in the open window
Ctrl+- Smaller text in the open window
Ctrl+0 Reset the text size in the open window
? Show the help

The text size keys work only when a window with readable content is open, such as a message, a plan or a preview, or when a pane is on screen. They scale HTML pages too. They also accept Ctrl+=, Ctrl+_ and the numeric keypad keys, and they work with the cursor in a field. On macOS, Cmd also works. With no such window open, the browser zooms the page as usual. When the terminal has focus, they change the terminal text size instead (see Terminal).

These keys act on the session under the sidebar cursor, or on the open session.

Keys Action
P Open the session plan
Ctrl+Shift+P Open or close the session picker. It works when the terminal has focus.
Shift+P Open the project picker of this board
I Open session info
. Pin or unpin the session
> Make the session sticky, or remove sticky
Ctrl+Shift+. Make the open session sticky, or remove sticky. It works when the terminal has focus.
Shift+F10 In the sidebar, open the menu of the item under the cursor, to move it to a group or fork a session. The Menu key also works.
Ctrl+D Dismiss the session. With the sidebar cursor on a group header, delete the group after you confirm.
Ctrl+Shift+L Show or hide the session log. It works when the terminal has focus. Shift+L also works outside the terminal.
Ctrl+Shift+M Open the last message in follow mode. If a waiting prompt is fresh, open that prompt. If the message detail is open, close it. It works when the terminal has focus. Shift+M also works outside the terminal.

These keys work in the message detail window. See Session log and details.

Keys Action
↓ Next message. After the last message, show the waiting prompt if there is one.
↑ Previous message
Ctrl+Enter Allow the waiting permission prompt, approve the waiting plan, or send the answers to a question. With review comments to send, send them.
1 to 9 Pick that option of the question on screen
← / → Go to the previous or next question tab, up to the Review tab

Ctrl+Enter works only when the waiting prompt is on screen and you can answer it from the board. It also works from the board’s log entry when no other window is open. On macOS, Cmd+Enter also works, and the hints on the prompts show ⌘ and ⌥. See Answer prompts from the board.

Keys Action
Ctrl+Alt+N Start a new session
Ctrl+Alt+R Resume a session with the claude --resume picker
Ctrl+Alt+S Swap to the previous session
Shift+C Copy the session id
Ctrl+Shift+C Copy SendMessage(<name>), where the name is the address other sessions use with SendMessage (running sessions only)

If no session is selected, the copy keys show a “No session selected” message.

On macOS the three Ctrl+Alt keys are ⌃⌥N, ⌃⌥R and ⌃⌥S.

Ctrl+Alt+N and Ctrl+Alt+R work only when the terminal is available. Ctrl+Alt+S switches between the last two sessions you opened. If the terminal has focus, it keeps focus after the swap. Inside Claude Code Hub, Claude Code Kanban keeps these three keys and does not send them to the hub.

These keys work anywhere on the page, also from inside the terminal. See Embedded terminal.

Keys Action
Ctrl+` Show or hide the terminal
Alt+` Move focus between the terminal and the page. If the terminal is hidden, show it.
Ctrl+Alt+` Move focus between the terminal and the dock item you used last in that terminal: the show card or an add-on’s header. A closed or collapsed card opens first. With no item used yet, it goes to the card, else to the first add-on.
Alt+Shift+` End the terminal session and close it. This works in the session view whenever the session has a running terminal, also when the terminal is hidden.
Ctrl+Shift+` Open the Terminals manager
Alt+↑, Alt+↓ Put the previous or next item of the dock rail in the dock: the show card or an add-on. Only while the terminal or the card has focus and the rail has two items or more.

These keys use the physical key left of 1. They do nothing when you also hold Cmd.

Inside the terminal:

  • Ctrl+C copies when text is selected. With no selection, it goes to the terminal as usual.
  • Ctrl+Shift+C always copies the selection.
  • Ctrl+V pastes from the clipboard.
  • R reconnects when the loading screen says “Slow to connect”. This shows when the connection has not opened after 1.5 s. At other times, R goes to the terminal as usual.
  • Ctrl++ and Ctrl+- make the terminal text larger or smaller, from 8 px to 32 px. Ctrl+0 resets it. Ctrl+_ still goes to Claude Code as undo.

These keys work while the show card above the terminal has focus. Press Ctrl+Alt+`, or click the card’s header or body, to focus it.

Keys Action
[ or ] Previous or next post
Alt+Enter Fill the terminal with the card, or go back to the card size
Alt+Shift+Enter Dock the card beside the terminal, or go back to the overlay
Esc Go back to the card size. If the card is not expanded, or it is docked, collapse it to its header and focus the terminal.
Alt+W Close the card until the next post, and focus the terminal
Ctrl+D Remove the post on screen, after a confirm
Ctrl++, Ctrl+-, Ctrl+0 Card text size

A text field inside an HTML card keeps these keys.

These keys work while the header of an add-on in the dock has focus. Press Ctrl+Alt+` to focus it when the add-on is the dock item you used last. They also work inside the add-on’s page when the page hands them back to the board, as the pages that /addon builds do; Esc stays with the page.

Keys Action
Alt+Enter Widen the add-on over the terminal, or go back to the dock width
Esc Go back to the dock width. If the add-on is not expanded, focus the terminal.
Alt+W Hide the dock and focus the terminal
Alt+↑, Alt+↓ Previous or next item of the dock rail

These keys work when Claude Code Kanban runs inside Claude Code Hub.

The Hub tab of the help shows only the keys that work. Outside the hub, that is the app links set with --marketplace-url, --cost-url or --memory-url. With none of them, the tab is hidden.

Keys Action
M Go to Marketplace, scoped to the session’s project
$ Go to Cost, on the session detail view
Ctrl+M Go to Memory, scoped to the session’s project
Ctrl+Alt+← or Ctrl+Alt+→ Previous or next hub app
Alt+1 to Alt+9 Go to a hub app by its number
Ctrl+Alt+P Open the project picker
Ctrl+Alt+W Open the config dir picker
Ctrl+Alt+A Open the app launcher

On macOS the keys are the same, written ⌃⌥←, ⌃⌥→, ⌃⌥P, ⌃⌥W and ⌃⌥A, and the hub app numbers use ⌃⌥1 to ⌃⌥9 instead of bare Alt.

These are the hub’s default keys. When you change the hub keys, the help shows your keys and hides a row that has no key. M, $ and Ctrl+M belong to Claude Code Kanban and do not change.

Keys Action
↓ or ↑ Move in the folder list
Enter Pick the highlighted folder, or start the session
Ctrl+Enter Start the session from the prompt field (Cmd+Enter on macOS)
Esc Close the folder list. Press again to close the dialog.
Keys Action
↓ or Ctrl+N Next session
↑ or Ctrl+P Previous session
Enter Open the session
Ctrl+Space Turn peeking on or off
Esc Close the picker

The terminal shows buttons when a session runs in another terminal, when Claude exits, or when the connection drops.

Keys Action
← or ↑ Previous button
→ or ↓ Next button
Enter or Space Press the button
Esc Show or hide the terminal

When a window is open, most shortcuts stop. These keys go through:

  • Esc closes the top window only. If the scratchpad is open, it closes first.
  • ? closes the help.
  • Shift+M closes the message detail.
  • The message detail keys work in the message detail.

The terminal keys, the Sessions keys, Ctrl+Shift+P, Ctrl+Shift+Z, Ctrl+Shift+K, Ctrl+Shift+L, Ctrl+Shift+M and the text size keys also work while a window is open. Inside Claude Code Hub, Ctrl+Alt+←, Ctrl+Alt+→, Alt+1 to Alt+9 (⌃⌥1 to ⌃⌥9 on macOS), Ctrl+Alt+P, Ctrl+Alt+W and Ctrl+Alt+A also work.